wiki SebMas

https://pjlink.jbmia.or.jp/english/dl_class2.html

https://superuser.com/questions/1698849/sending-pjlink-commands-with-netcat

Merci from Popo at the theatre de Nice

do shell script "echo \"(shu0)\" | nc -w 0 201.0.0.2 3002"

do shell script "echo \"(shu1)\" | nc -w 0 201.0.0.2 3002"

do shell script "echo \"\\xBE\\xEF\\x03\\x06\\x00\\x63\\x92\\x01\\x00\\x05\\x24\\x01\\x00\\r\" | nc -w 0 192.168.1.254 23"

do shell script "echo \"\\xBE\\xEF\\x03\\x06\\x00\\xF3\\x93\\x01\\x00\\x05\\x24\\x00\\x00\\r\" | nc -w 0 192.168.1.254 23"

set powerOff to "/cgi-bin/power_off.cgi"
set shutterClose to "/cgi-bin/proj_ctl.cgi?key=shutter_on&lang=e&osd=on"
set shutterOpen to "/cgi-bin/proj_ctl.cgi?key=shutter_off&lang=e&osd=on"


#Do not change anything above this line!


set theServer to "192.168.0.8" -- set this to the ip address of the projector
set theUsername to "user1" -- set this to the username for the projector
set thePassword to "panasonic" --set this to the password for the projector
set theCommand to shutterClose --set the command required, option are, powerOn, powerOff, shutterClose, shutterOpen


#Do not change anything below this line


set theProtocol to "http" -- vs https
set theUserPass to theUsername & ":" & thePassword -- your Indigo remote access username/password
set theURL to theProtocol & "://" & theUserPass & "@" & theServer & theCommand
set theFinalURL to "\"" & theURL & "\""
try
	with timeout of 1 second
		do shell script "/usr/bin/curl" & " " & "--connect-timeout" & " " & "1" & " " & theFinalURL
	end timeout
end try

powerOn to "/cgi-bin/power_on.cgi"
set powerOff to "/cgi-bin/power_off.cgi"
set shutterClose to "/cgi-bin/proj_ctl.cgi?key=shutter_on&lang=e&osd=on"
set shutterOpen to "/cgi-bin/proj_ctl.cgi?key=shutter_off&lang=e&osd=on"


#Do not change anything above this line!


set theServer to "192.168.0.8" -- set this to the ip address of the projector
set theUsername to "user1" -- set this to the username for the projector
set thePassword to "panasonic" --set this to the password for the projector
set theCommand to shutterOpen --set the command required, option are, powerOn, powerOff, shutterClose, shutterOpen


#Do not change anything below this line


set theProtocol to "http" -- vs https
set theUserPass to theUsername & ":" & thePassword -- your Indigo remote access username/password
set theURL to theProtocol & "://" & theUserPass & "@" & theServer & theCommand
set theFinalURL to "\"" & theURL & "\""
try
	with timeout of 1 second
		do shell script "/usr/bin/curl" & " " & "--connect-timeout" & " " & "1" & " " & theFinalURL
	end timeout
end try