Differences

This shows you the differences between two versions of the page.

--- qlab [2024/10/31 19:28] – [pjlink] ssm2017
+++ qlab [2026/01/28 11:57] (current) – removed ssm2017
@@ Line 1: / Line 1: @@
-===== vp remote =====
-==== pjlink ====
-  https://github.com/davethw/pjlink
-  https://pjlink.jbmia.or.jp/english/dl_class2.html
-  https://superuser.com/questions/1698849/sending-pjlink-commands-with-netcat
-==== Christie ====
-Merci from Popo at the theatre de Nice
-=== SHUTTER Christie Serie G, GS ===
-<sxh>
-do shell script "echo \"(shu0)\" | nc -w 0 201.0.0.2 3002"
-</sxh>
-<sxh>
-do shell script "echo \"(shu1)\" | nc -w 0 201.0.0.2 3002"
-</sxh>
-=== SHUTTER Christie Serie Q ===
-<sxh>
-do shell script "echo \"\\xBE\\xEF\\x03\\x06\\x00\\x63\\x92\\x01\\x00\\x05\\x24\\x01\\x00\\r\" | nc -w 0 192.168.1.254 23"
-</sxh>
-<sxh>
-do shell script "echo \"\\xBE\\xEF\\x03\\x06\\x00\\xF3\\x93\\x01\\x00\\x05\\x24\\x00\\x00\\r\" | nc -w 0 192.168.1.254 23"
-</sxh>
-==== Panasonic ====
-<sxh>
-set powerOff to "/cgi-bin/power_off.cgi"
-set shutterClose to "/cgi-bin/proj_ctl.cgi?key=shutter_on&lang=e&osd=on"
-set shutterOpen to "/cgi-bin/proj_ctl.cgi?key=shutter_off&lang=e&osd=on"
-#Do not change anything above this line!
-set theServer to "192.168.0.8" -- set this to the ip address of the projector
-set theUsername to "user1" -- set this to the username for the projector
-set thePassword to "panasonic" --set this to the password for the projector
-set theCommand to shutterClose --set the command required, option are, powerOn, powerOff, shutterClose, shutterOpen
-#Do not change anything below this line
-set theProtocol to "http" -- vs https
-set theUserPass to theUsername & ":" & thePassword -- your Indigo remote access username/password
-set theURL to theProtocol & "://" & theUserPass & "@" & theServer & theCommand
-set theFinalURL to "\"" & theURL & "\""
-try
-	with timeout of 1 second
-		do shell script "/usr/bin/curl" & " " & "--connect-timeout" & " " & "1" & " " & theFinalURL
-	end timeout
-end try
-</sxh>
-<sxh>
-powerOn to "/cgi-bin/power_on.cgi"
-set powerOff to "/cgi-bin/power_off.cgi"
-set shutterClose to "/cgi-bin/proj_ctl.cgi?key=shutter_on&lang=e&osd=on"
-set shutterOpen to "/cgi-bin/proj_ctl.cgi?key=shutter_off&lang=e&osd=on"
-#Do not change anything above this line!
-set theServer to "192.168.0.8" -- set this to the ip address of the projector
-set theUsername to "user1" -- set this to the username for the projector
-set thePassword to "panasonic" --set this to the password for the projector
-set theCommand to shutterOpen --set the command required, option are, powerOn, powerOff, shutterClose, shutterOpen
-#Do not change anything below this line
-set theProtocol to "http" -- vs https
-set theUserPass to theUsername & ":" & thePassword -- your Indigo remote access username/password
-set theURL to theProtocol & "://" & theUserPass & "@" & theServer & theCommand
-set theFinalURL to "\"" & theURL & "\""
-try
-	with timeout of 1 second
-		do shell script "/usr/bin/curl" & " " & "--connect-timeout" & " " & "1" & " " & theFinalURL
-	end timeout
-end try
-</sxh>

wiki SebMas

User Tools

Differences