This is an old revision of the document!
EOS
show
save show
shift + update
patch
patch by address
format
remove address
chan 1 address enter
delete channel
delete chan 1 enter
chan check
chan 1 at 70 [softkey chan check] enter next/previous (page up/down)
undo
undo last command
undo enter
undo multiple commands
undo page up enter
live
groups
add channel at the end of the group
group 2 enter +79 enter
remove chan from group
group 2 enter -79 enter
add chan in specific place in group
group 2 enter 79 insert before 7 enter
levels
add 5%
chan 1 at +05 enter
divide level by 50%
chan 1 at /50 enter
multiply level by 2 (200%)
chan 1 at /200 enter
fan level
chan 1 thru 10 at 1 thru full enter
selection
selection offset
chan 1 thru 10 offset 2 enter
select active
select active (ctrl a)
select last
select last (ctrl l)
park
park channel
chan 5 @ 50 park enter
park at current value
chan 5 park enter
park parameter
chan 5 color park enter
park address
address 5 @ 75 park enter
remove park
chan 5 park enter
unpark all
park enter
unpark address
address park enter
using park tab
park channel
chan 2 @ 50 enter
park address
address 5 @ 75 enter
unpark channel
chan 2 @ enter
unpark address
address 5 @ enter
copy to / recall from
copy channel
chan 1 copyto chan 2 enter
copy parameter
chan 1 color copyto chan 2 enter
timing
delay by parameter
group 1 tilt delay 5 enter
remove time or delay
group 1 delay enter
palettes
distribute to palettes
group 1 focuspalette 1 to 5 enter
fan with palettes
group 1 focuspalette 1 + 5 enter
record only parameter
group 1 goboselect record beampalette 2 enter
display values (need confirmation)
show values instead of palette name
about label
same but always
about label label
go back to name
about
groups
sub groups (shift+slash)
(chan 1+chan2)(chan 11+chan12)
sneak
change value with default time
sneak enter
force time
sneak 0 enter
change value for a channel with time
chan 1 thru 5 at 50 sneak 5 enter
faders
unload fader
shift + load
cue list
release cuelist
goto cue 2/ out
go to cue 0 and home device params
goto cue out enter
go to cue 0 without touching non intensity parameters
goto cue 0 enter
reload cue 1
goto cue 1 enter
reload active cue
goto cue enter
record next
record next
other
goto cue next/last
record blackout (et penser à mettre un block et assert sur le cue en question)
select active out record next
go to cue 5 with cue time
goto cue 5 time enter
go to cue 5 with custom time
goto cue 5 time 3 enter
preload (jump to) cue 5 to next
cue 5 load
save value only to specific cue in blind mode
chan 1 at 50 cue only enter
effects
stop effect
group 1 stopeffect (ctrl+shift+e) enter
stop running effect
group 1 effect enter
flyout
source absolute effect
| action | param | step time | time | dwell | level |
|---|---|---|---|---|---|
| 1 | intens | 0 | 0 | 3.99 | 100.0 |
| 2 | tilt | (0) | 0 | 0 | bkgrd |
| 3 | tilt | 2.99 | 3.49 | 0.5 | (+)-100 |
| 4 | intens | 0.75 | 0.5 | 1.5 | 0.0 |
| 5 | tilt | 1.5 | 0 | 0 | bkgrd |
sym circle
inspiration : https://community.etcconnect.com/control_consoles/eos-family-consoles/macros/i/macro-favorites/symmetrical-circle-effect
- group 1 : 1 thru 4
- group 2 : 5 thru 8
- effect 1 : circle (standard)
- effect 2 : circle (attributes reverse / green arrow left down (mirror hor + mirror vert)
- macro 1 :
group 1 effect 1 group 2 offset reverse effect 2
a revoir
- block
- autoblock
- assert
missing
- group 1 at full thru 0 thru full
group 1 beam palette 20 time 5–> group 1 beam palette 20 sneak 5cue 2/ out–> goto cue 2/ out- where is the “move” button ?
- small faders on big screen
- locked on “syntax error”
OSC
Tests
client.send_message("/eos/cmd", "Tilt @ +0.1#")
Show Control
pip install python-osc
from pythonosc import udp_client
client = udp_client.SimpleUDPClient("10.0.0.1",8000)
client.send_message("/eos/cmd", "Event 1 / Network_Inputs#")
client.send_message("/eos/cmd", "Event 1 _sACN 1 / 1#")
client.send_message("/eos/cmd", "Event 1 Show_Control_Action Level_By_Address 1 / 1#")
Faders
To use faders, we need to define a “virtual” fader page for osc containing a fixed number of faders and then use them to control real faders. source : https://community.troikatronix.com/topic/5351/tutorial-how-to-do-fader-communication-with-etc-eos-lighting-desk-using-osc
/eos/fader/1/config/10 /eos/user/2/fader/1/1 = 0.5