Differences

This shows you the differences between two versions of the page.

--- eos [2023/12/19 14:12] – [flyout] ssm2017
+++ eos [2024/11/22 12:31] (current) – [Show Control] ssm2017
@@ Line 364: / Line 364: @@
 ===== effects =====
+usefull macro : "effect 1 Learn Time Sample BPM"
 ==== stop effect ====
@@ Line 388: / Line 388: @@
 ==== sym circle ====
+=== version 1 ===
 inspiration : https://community.etcconnect.com/control_consoles/eos-family-consoles/macros/i/macro-favorites/symmetrical-circle-effect
   * group 1 : 1 thru 4
@@ Line 397: / Line 398: @@
 group 1 effect 1
 group 2 offset reverse effect 2
+</sxh>
+=== version bg ===
+using same effects, need to set "Axis -10" to be very symetrical
+<sxh>
+Offset Num_Groups 2
+Next Effect 4
+Next Offset Reverse Effect 5
+</sxh>
+=== version mega <del>bg</del> shlag ===
+only working for 4 fixtures..... it is better to use version bg...
+source : https://youtu.be/JagsTbVKXPI?si=Ra53JlNqQgec5tjK
+<sxh>
+hardkey : tab 12
+chan 1 t 4 type ayrton eurus s basic
+-> panel augmented3d
+chan 1 thru 4 position */*/5
+chan 1 thtu 4 position */4/
+chan 1 thru 4 position -4/*/thru 4/*/
+hardkey esc
+chan 1 thru 4 record group 1
+group 1 @ full
+mouse : in augment3d tab, left click and maintain on the lead singer position until the machines are in place
+record focus palette 1
+effect effect
+copy to 901.1
+effect 901.1 reverse steps
+hardkey : esc
+g 1 a f f
+group 1 offset chan per group 2
+next
+group 1 offset chan per group 2: chan 1 thru 2 effect 901
+next
+group 1 offset chan per group 2: chan 3 thru 4 effect 901.1
+effect 901.1 axis -15
+record preset 10 plus fx
+ctrl+g+o+i+0
+g 1 alt+p 10
 </sxh>
 ===== a revoir =====
-  * block
+  * <del>block</del>
   * autoblock
-  * assert
+  * <del>assert</del>
-=====missing =====
+===== missing =====
   * group 1 at full thru 0 thru full
   * <del>group 1 beam palette 20 time 5</del> --> group 1 beam palette 20 sneak 5
   * <del>cue 2/ out</del> --> goto cue 2/ out
-  * where is the "move" button ?
+  * <del>where is the "move" button ?</del> --> copyto*2
   * small faders on big screen
   * locked on "syntax error"
+  * out out = out time 0
+===== OSC =====
+==== Tests ====
+<sxh python>
+client.send_message("/eos/cmd", "Tilt @ +0.1#")
+</sxh>
+==== Show Control ====
+<sxh python>
+pip install python-osc
+from pythonosc import udp_client
+client = udp_client.SimpleUDPClient("10.0.0.1",8000)
+client.send_message("/eos/cmd", "Event 1 / Network_Inputs#")
+client.send_message("/eos/cmd", "Event 1 _sACN 1 / 1#")
+client.send_message("/eos/cmd", "Event 1 Show_Control_Action Level_By_Address 1 / 1#")
+</sxh>
+<sxh python>
+from pythonosc import udp_client
+input_universe = 1
+output_universe = 2
+event_list = "2"
+desk_ip = "192.168.0.100"
+client = udp_client.SimpleUDPClient(desk_ip,8000)
+client.send_message("/eos/cmd", "Delete Event " + event_list+ " /#")
+client.send_message("/eos/cmd", "Event " + event_list+ " /#")
+client.send_message("/eos/cmd", "Event " + event_list+ " / Network_Inputs#")
+client.send_message("/eos/cmd", "Event " + event_list+ " / External Enable#")
+for id in range(1,513):
+    input_address = str(((input_universe - 1) * 512) + id)
+    output_address = str(((output_universe - 1) * 512) + id)
+    client.send_message("/eos/cmd", "Event " + event_list+ " / " + input_address+ " _sACN "+ input_address+ "#")
+    client.send_message("/eos/cmd", "Event " + event_list+ " / " + input_address+ " Show_Control_Action Level_By_Address "+ output_address +"#")
+</sxh>
+==== Faders ====
+To use faders, we need to define a "virtual" fader page for osc containing a fixed number of faders and then use them to control real faders.
+source : https://community.troikatronix.com/topic/5351/tutorial-how-to-do-fader-communication-with-etc-eos-lighting-desk-using-osc
+<sxh>
+/eos/fader/1/config/10
+/eos/user/2/fader/1/1 = 0.5
+</sxh>